Emcore 2800 The Emcore/Force Model 2800 1RU Front Panel Rack-mount Kit is designed to allow up to five modules of certain fiber optic products to be adapted for use in a standard EIA 19" rack. This allows for dense packing of fiber optic modules, reducing the space required for installation. Unit status indicator LED's are still visible from the front of the panel, and all connections are made to the rear of the units.
Emcore 2801-2802 The Emcore Model 2801/2802- 5 Channel Multimode and 10 Channel Singlemode Fiber Optic Link, 5-250 MHz - The CATVLite® Series emcore/Force, Incorporated Model 2801 VSB/AM Fiber Optic Video Link provides a high-quality system for transferring five video channels per multimode fiber with complete EMI immunity via fiber optics. The unit offers exceptional analog bandwidth from 5 MHz to over 250 MHz allowing transmission of all sub-band channels, low-band channels, FM channels, mid-band and h-band channels. (i.e. Channels T7-T13, 2-6, A5-A1, AI, 7-13.) The units may also be used for 6 MHz TV IF (45.75 MHz) and satellite IF (70 MHz) transmission. The CATVLinx® Series Force/Emcore, Incorporated Model 2802 10 Channel VSB/AM Video Link provides a high-quality system for transferring up to ten video channels over single-mode optical fiber with complete EMI immunity. The unit offers exceptional analog bandwidth from 5 MHz to over 250 MHz allowing transmission of all sub-band channels, low-band channels, FM channels, and mid-band channels. The lowest high-band channels may also be accommodated. The best performance will be achieved when the channel plan is designed to contain all of the channels within a single octave of bandwidth.
Emcore 2804 The Emcore/Force CATV® Linx Model 2804 110 Channel CATV Professional Distribution System (PDS) transmitter for transferring up to 110 channels of VSB/AM modulated signals over a single-mode optical fiber. The system is also suitable for transferring 80 CATV channels along with 30 digital QAM channels in the upper frequency range. The Emcore/Force Model 2804 provides 40-870 MHz of usable bandwidth for video signals stacked at 6 MHz intervals. A low loss single-mode fiber allows full channel loading to beyond 20 km while maintaining a good carrier-to-noise ratio. A key power lock ensures the transmitter cannot be accidentally turned off, and a blue 7-segment LED readout allows the user to monitor a number of system parameters.
Emcore 2805 The CATV® Linx Emcore/Force Model 2805-110 Channel CATV Private Network Solution (PNS) transmitter is part of a robust system for transferring up to 110 channels of VSB/AM modulated signals over a single-mode optical fiber. The system provides 40-870 MHz of usable bandwidth for video signals stacked at 6 MHz intervals. A low loss single-mode optical fiber allows full channel loading to beyond 20 km while maintaining a good carrier-tonoise ratio. The emcore/Force Model 2805 may be used with the Emcore/Force Model 2807 mini-node receiver for use in return path and multiple splitter applications or with the Emcore/Force Model 2808 receiver for basic 110 channel CATV transmission. In all cases, the link provides excellent performance for many demanding applications such as broadband LANs, distance learning, and multiple data services.
Emcore 2807 The Emcore/Force CATVLinx Model 2807 Mini-node Optical Receiver, working with either the Emcore/Force Model 2804 PDS or 2805 PNS transmitter, provides CATV distribution headend operators with an extensive array of features that offer a low-cost solution to increase system performance. The unit provides an output of +38 dBmV of RF over the entire optical input range, allowing multiple RF splits without the use of an external RF amplifier. Additionally, the mini-node's ability to operate over a wide optical input range of -8 to +4.5 dBm allows for a variety of system designs without degrading performance
Emcore 2990PRO The Emcore/Force Model 2990PRO L-Band Satellite Fiber Optic Transport System provides an economical solution for transporting digital signals for numerous satellite distribution applications, including headend relocation, and distribution of digital broadcast systems (DBS). The Emcore 2990PRO utilizes a cost-effective coax cabling configuration to distribute the RF signals from the dish to the transmitter and from the receiver to the headend.
Emcore 3000 The Emcore/Force SPECTRA Link Model 3000 L Band Series Satellite Transport System brings a state-of-the-art modular approach to the demanding Teleport environment. Spanning the entire L-Band frequency range (950-2150 MHz), the link employs a number of feature rich components to create a highly reliable system.
Emcore 3005 The Emcore Model 3005 L Band Satellite Fiber Optic Transport Link System provides an economical solution for transporting digital signals for numerous satellite distribution applications, including headend relocation. The system utilizes a cost-effective coax cabling configuration to distribute the RF signals from the dish to the transmitter and from the receiver to the headend. The single-mode optical fiber between the 3005 transmitter and receiver allows transmission distances to 2 km at 1310 nm. The transmitter has the ability to supply LNB power at the remote dish site, there by decreasing the need and expense of additional equipment. A front panel mounted switch allows the user to select between +13 Volts and +18 Volts or disable the LNB power. RF alarm and indicator LEDs allow for a quick assessment of the link's operational status. The Model 3005 L Band Transport System, whether used in an antenna remoting application or in a satellite distribution role, provides for transmis-sion of the entire L Band spectrum in a simplified, flexible installation environment at one of the lowest costs found in today's market.
Emcore 3762 The Ortel/Emcore Digital EXCEL Model 3762 MLinx Broadcast Fiber Optic Transport Platform offers a comprehensive state-of-the-art digital transport solution for broadcasters and cable operators converting from analog to digital video television formats.
Emcore 3763 The Emcore/Force 3763 Multi-Video Platform provides broadcasters and cable operators with a migration path allowing them to transport digitized analog signals and digital signals.
Emcore 4762 The Emcore/Force 4762 Multi-Video Platform provides broadcasters and cable operators with a migration path allowing them to transport digitized analog signals and digital signals supporting 16 analog video, 8 SDI, 24 ASI, and 48 SMPTE 310M on a single fiber.
Emcore Pona 2100 The Emcore/Force PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA) is an ideal building block for OEM system integrators. The family of PONA 2100 series EDFAs is designed to meet the most demanding noise performance requirements of CATV applications, and performs all the functions required of an optical amplifier for system integration. PONA 2100 series EDFAs provide optical isolation on the input and output of the gain block for stable, low noise operation.
Emcore Pona 3000 The Emcore/Force PONA 3000 Series Fiber Optical Amplifier Module is an ideal building block for OEM system integrators. The family of PONA 3000 Optical Amplifiers is designed to meet the most demanding noise performance requirements of CATV and FTTx applications, and performs all the functions required of an optical amplifier for system integration.
Emcore VX-1DVI The Emcore VX-1DVI optical extender is a single fiber DVI extender that can send one channel of DVI video up to 6.2 miles (10 km). The extender is a low profile unit that transports over standard multimode or singlemode fiber using LC type optical connectors for a secure cable connection.
Emcore 2792PRO The Emcore/Force Model 2792PRO is a versatile Video/Audio and Data Fiber Optic transport solution operating in either multimode or single-mode fiber, increasing the system's flexibility. The module incorporates high quality 12 bit digitized Analog Video allowing Broadcast Quality Video transport at contribution prices. Includes 2 channels of 24 bit digitized Audio for excellent quality.
Emcore NMOA8200 The Emcore NMOA8200 series product line is a family of state-of-the-art high performance CATV erbium doped fiber amplifiers (EDFA) or erbium/ytterbium doped fiber amplifiers (EYDFA). Packaged in a convenient 2RU housing, this line of fiber amplifiers uses the latest DSP technology at the core of electrical control circuitry resulting in superior output power stability & exceptionally low noise figures demanded by CATV applications.
Emcore HDMX Series The Emcore HDMX Series features CATx extension: up to 100 meters, Fiber extension: MM up to 300 meters and SM up to 10 km, modular blades come in 4 inputs or 4 outputs, switches video and audio separately, and redundant hot-swappable power supplies.
Emcore OPG-1DVI2A1D1UKM The Emcore openGear OPG-1DVI2A1D1UKM fiber optic link provides for the digital transmission of video with audio and serial data at broadcast quality. The OPG-1DVI2A1D1UKM is an excellent choice for transmitting the full range of dual-link DVI and SMPTE compliant digital/analog video with audio and serial data over long or short distances using optical fiber.
Emcore OPG-2HDP16DA The Emcore OPG-2HDP16DA is five products in one: 3G HD-SDI video, audio embedding/ de-embedding, audio signal routing, audio conversion and fiber transport.
Emcore OPD-2HDP The Emcore OPD-2HDP is an excellent choice for transporting SMPTE compliant video signals over long or short distances with a single optical wavelength. Supporting two independent SMPTE video signals, the system offers the complete flexibility needed for transporting full uncompressed (2.97 Gbps) 1080p HD over optical fiber.
NOTE: You may need the FREE Adobe Reader to view this document. If you do not have it installed on your computer, you can download it here: